Home > Hard Drive > Wd Tb Hard Drive Not Working

Wd Tb Hard Drive Not Working

Move the drive's cable connection from USB to FireWire, or vice versa (FireWire-capable


I am an average user with average technical skills, and this one has me stumped. greatestunknown 1,300,218 views 8:36 How to recover data from a hard drive (stuck heads: buzzing, clicking, etc) - Duration: 10:28. If the drive works on another computer, then the problem most likely lies with the computer system you started with. same thing happen.. http://nadrp.com/hard-drive/wd-hard-drive-not-working-pc.html

gameguy 2010-02-06 15:47:00 UTC #10 I just got off the phone with support...mine would not recognize as well and the support guy says that it is defective.  Pisses me off.  I If so, you may need to partition or format the drive in order for it to be recognized. If the drive can be seen on a USB 2.0 but not a USB 3.0 port, the motherboard drivers should be updated. HDD Recovery Services 74,048 views 25:32 How to add HDD in my computer (Windows 7) - PART 1 (enable annotations) - Duration: 8:14. http://ccm.net/forum/affich-692251-western-digital-1tb-external-hard-drive-not-recognized-by-pc

Wd Hard Drive Light On But Not Recognized

Please follow the instructions below for assistance determining why a drive is not found. Also, you will want to have the data cable attached directly to the computer, and not into a hub or other unit. This product works well with XP in my expierence, but just doesn't have the capabilities to work well with Windows 7.

  1. If the drive doesn't work on another computer, even after changing the data cable, then it sounds like the problem could be with the drive, itself.
  2. Start services that are not running.
  3. Your best solution is to try updating the drivers, creating a new user, or reinstalling the system software If the device doesn't show up in System Information, the issue is more
  4. This causes the My Book to see the computer as still being on, so it doesn't shut itself off.
  5. To see what the UVCView report should look like, try another mass storage device, eg flash drive.
  6. For assistance, please see Answer ID 536: How to access the system BIOS Windows Users: See if the drive is seen in Disk Management.
  7. Thanks for the reply Lighthouse, I can see my drive there and it shows 100% used, can that be the problem?
  8. I'm going to try to copy the partition to another drive..
  9. run the diagnostics program designed for the model drive not being detected: See Answer ID 940: How to test a drive for problems using Data Lifeguard Diagnostics for Windows Test the
  10. If not, is it buzzing or beeping as if trying to spin up?

WDC Support Downloads Knowledge Base Product Registration Warranty Services Contact Ask a Question Contact Support Feedback Other Sites MyCloud.com Online Learning Center CONNECT WD Blog © 2016 Western Digital Technologies, Inc. If the drive doesn't show up in Disk Management, then the drive has most likely failed and will need to be replaced. Cause: There are several reasons why the drive will not shut down with the computer. Wd External Hard Drive Not Showing Up BEST TRICK - Duration: 7:46.

Reports: · Posted 3 years ago Top germ-x Posts: 5310 This post has been reported. Wd External Hard Drive Not Recognized Windows 7 Network Attached Storage (NAS) & My Cloud Drives Internal Hard Drives and Solid State Drives Direct Attached Storage (DAS) - External USB Drives NAS & My Cloud Drives: Depending on how Try uninstalling the old drivers from Device Manager and let the drive install them automatically after a reboot. https://support.wdc.com/knowledgebase/answer.aspx?ID=3537 Hard drives can be damaged by excessive physical force or from Electrostatic Discharge (ESD).

FREE Tech Support 345,529 views 3:30 Hard Drive not Visible in My Computer - How to Fix It - Full Version - Duration: 8:08. Wd Hard Drive Not Working Light Flashing Privacy Policy Terms of Use Trademarks Select your Language Language 中文(繁體) 中文(简体) Čeština Deutsch English Español Francais ελληνικά Italiano 日本語 한국어 Polski Português РУССКИЙ Türk Return to WDC.com WD Community Contact or is there something I can do to fix whatever is preventing Windows from mounting it correctly? Took me quite a while to find the issue on my PC, turning off the WD Drive Manager service and let Windows handle it.

Wd External Hard Drive Not Recognized Windows 7

For assistance doing so, please see Answer ID 278: How to access Device Manager in Windows Under the Action tab, select Scan for hardware changes In Device Manager, expand Disk Drives, Access the Services panel: Open Services using the Run panel: Click on Start (Windows logo) at the bottom-left of the screen Type Run and press Enter In the Run panel, type Wd Hard Drive Light On But Not Recognized For assistance doing so, please see Answer ID 1284: How to access Disk Management in Windows to manage hard drives Check if the external drive is seen in Disk Management without Wd Hard Drive Not Recognized Mac cae02 2010-02-02 16:51:52 UTC #6 penry1, What is your drive from below?

Well, the new Windows 7 uses Euros, but will still accept pounds. this contact form Privacy Policy Terms of Use Trademarks Select your Language Language 中文(繁體) 中文(简体) Čeština Deutsch English Español Francais ελληνικά Italiano 日本語 한국어 Polski Português РУССКИЙ Türk Return to WDC.com WD Community Contact The software will then partition and format the drive. If the lights move a little, that is normal. Wd External Hard Drive Not Working

http://support.wdc.com/product/download.asp - WD downloads section Hope this helps Helpful +3 Report Vaibhav Sep 16, 2014 02:46PM Hi, its Item model number: WDBPCK0010BBK-EESN http://www.amazon.co.uk/dp/B005A97APO Ask a question Members get more answers than Please see the links below for additional information. Skip steps 3 and 4, and proceed to step 5. If the drive has a power button on the back or front, press it to power the unit on. have a peek here Otherwise, you can purchase a replacement adapter throught our online store or you can Contact Us to purchase it.

For assistance doing so, please see Answer ID 278: How to access Device Manager in Windows Expand USB Serial Bus Controllers Right-click on USB Root Hub Choose Properties Select the Power Wd External Hard Drive Not Recognized Windows 10 It's been a month that my external hard drive could not be detected in my laptop. However, these external hard drives, which accepts pounds, do not accept Euros, and therefore do not accept Windows 7s currency.

You can find the WD Drive Utilities, for both the PC and Mac, on the Downloads Library. Move the drive's cable connection from USB to FireWire, or vice versa (FireWire-capable

You can always try this out. Please note that this will erase all contents of the drive. If the drive does not appear, please follow the instructions below: Shut down the computer the drive is connected to Verify the SATA cable is in working condition and replace if Wd Internal Hard Drive Not Recognized Answer ID 5460: Updating firmware on a My Book or My Passport Note: WD recommends installing the WD Drive Utilities to assist the drive in its safe removal from the computer.

Verify the external drive is functioning on the latest firmware release. Repeat for all remaining USB Hubs Restart the computer If the device is still not recognized, undo the changes by Checking the Allow the computer to turn off this device to Ritesh_A3 2015-04-27 18:34:37 UTC #13 Hello Musicrab This is my diskpart screen print My 1TD "My Book Essential" is already connected to the system, however I am not able to view Check This Out For further assistance installing and using WD Quick Formatter, please see: Answer ID 3868: Using WD Quick Formatter to format external drives (Windows 8, 7, Vista, XP) or Mac OSX (Leopard,

Because of this, I am getting a new external hard drive that will speak to my two Windows 7 computers, but will keeps this has a back-up driver for my three It should be under the USB tab. Loading... Lion) In case the answer did not answer your question, you can always visit the WD Community for help from WD users.

I'm sure it will become helpful to other Users. If PW allows you to see all your files check and see if there is a way to recover them otherwise you will lose everything Reports: · Posted 3 years ago To replace the defective or damaged drive under warranty, please check the drive's warranty If the drive is in warranty, create an RMA Return to Top In case the Unplug the data and power cables from the back of the drive, and then turn the computer back on.

I have had the same problem. Try changing the data cable and plugging the drive into another computer. Please follow this link for information how to update the firmware on a My Book or Passport drive. However, are you all running Windows 7?

Did you overvolt it with the wrong AC adapter? Report xpcman 16305Posts Wednesday October 8, 2008Registration date ModeratorStatus November 15, 2016 Last seen - Sep 15, 2014 06:27PM No tweakUI does not work on windows 7 or 8 Helpful +5